LP Sensor Technology provides industrial sensors, wireless I/O modules and IoT solutions for remote monitoring and control through LoRa and Modbus communications.
LP Sensor Technology supplies industrial sensors and IoT solutions, including wireless input/output modules for remote monitoring and control. Its LP-M series uses encrypted LoRa communications and connects to automation systems through the LP-C01 gateway using Modbus TCP or Modbus RTU.
Browse manuals for products such as the LP-M01 Plus digital input module and LP-M04 industrial wireless switch for wiring, installation, configuration and firmware update instructions. Match the manual to your exact model and hardware revision.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Available manuals include the LP-M01 Plus industrial IoT digital input module and LP-M04 industrial wireless switch. Select the manual matching your exact model.
The LP-M01 Plus manual lists support@lpsensortech.com and +1-949-269-3078 as contact details.
Use the model-specific configuration tool and follow the manual to match the spreading factor, frequency plan, frequency and AES128 key. The LP-M04 manual recommends a hardware reset after parameter changes.
Confirm the model and firmware revision, follow the model-specific update procedure, and do not disconnect power or the USB cable during the update.
No dedicated warranty or registration page is confirmed in the available information. Contact LP Sensor Technology for terms and any registration requirements for your product.