Lo & Co makes architectural door and cabinetry hardware, including entry pulls, levers, knobs and marble handles, for practical use throughout home interiors.
Lo & Co supplies architectural doorware and cabinetry hardware, including entry pulls, sliding door edge pulls, passage levers, cabinet handles and knobs.
Find installation guides covering door compatibility, fixing dimensions, drilling templates, assembly and care. Follow the instructions for your specific product and print templates at 100% scale.
Professional installation is recommended. For product assistance, visit the official contact page.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Browse this category for the guide matching your product. If your guide is missing, contact Lo & Co through its official contact page.
Print the supplied template at actual size or 100% scale. Check the product-specific hole spacing before drilling.
Yes. The supplied guides recommend a professional installer. Door thickness, screw lengths and hole spacing vary by product.
Tighten fixings gently by hand with a manual screwdriver, never a powered driver. Clean with a soft, damp cloth, avoid abrasive or acidic cleaners, and dry after contact with water.
The official warranty information states five years against structural defects and 12 months for defects in finishes, materials and workmanship, from purchase. Consult the warranty page for full terms.