LiNTEC is a line of professional vintage program equalizers created by Lindell Audio, designed for studio recording, mixing, and audio production.
LiNTEC is a renowned product line by Lindell Audio, offering high-quality vintage program equalizers for audio professionals, producers, and sound engineers. Utilizing classic components like the vintage 1731 op-amp, LiNTEC equalizers deliver a smooth, punchy character characteristic of classic studio outboard gear.
Famous for enabling the classic 'Low-End Trick,' the LiNTEC equalizer allows engineers to boost and attenuate low frequencies simultaneously for satisfying low-end thump without muddying the midrange. Whether adjusting frequencies in mixing buses or fine-tuning program material, these hand-calibrated devices offer precision and vintage warmth. Lindell Audio's LiNTEC products are distributed globally by RAD Global Distribution.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Let the unit warm up for 1-2 minutes. Depending on your version, either pass a +8 dBu audio signal or ensure no audio is passing, then use a small flathead screwdriver on the master calibration set screw on the rear panel until the needle rests on 0.
You must only use the supplied 12V AC power adapter. Using a different power supply can potentially damage the equalizer.
It is a famous EQ technique where you simultaneously boost and attenuate the selected low frequency. Because the bandwidth (Q) of the Boost and Atten controls differ, they don't cancel out, resulting in a satisfying thump without muddying the midrange.
Yes, all LiNTECs are hand-calibrated at the factory to match each other at unity gain within 0.2 dB for use in matched stereo pairs. You can also adjust the Output Calibration control on the back of the unit if needed.
Lindell Audio provides a standard 1-year limited warranty for defects in materials and workmanship to the original purchaser.