LIFT encompasses high-performance products ranging from LIFT Safety protective gear and DAX hard hats to innovative Lift Foils electric hydrofoil surfboards and eFoils.
The LIFT brand category provides user manuals, installation guides, and operating instructions for products operating under the LIFT name.
This prominently includes two distinct brands:
Whether you need to properly secure your hard hat safety equipment or troubleshoot your eFoil hand controller, you will find comprehensive product documentation and user guides below.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
You can auto-pair by placing the eBox into pairing mode and powering on the controller, or pair it manually by holding the Select and Power buttons down simultaneously.
Mark and drill the required holes on both sides of the hard hat, align the mount holes with the drilled holes, then screw the mounts on and tighten them securely before attaching the brackets.
It indicates that too much current is being drawn from the eFoil battery. The eFoil will be temporarily disabled until you release the hand controller trigger to reset the speed to zero.
To engage the chin strap buckle, place the top clip on the outside of the receiver so the magnet engages. To remove it, grasp the top and bottom of the buckle with your thumb and pointer finger, and squeeze to slide and disengage the magnetic clip.