Lexia offers professional-grade OBD-II diagnostic tools and software, specifically designed for dealer-level servicing of Peugeot and Citroën vehicles.
Lexia specializes in automotive diagnostic equipment, most notably the Lexia 3 PP2000 diagnostic scanner interface.
Designed specifically for Peugeot and Citroën vehicles, Lexia tools allow mechanics and car enthusiasts to perform comprehensive dealer-level diagnostics. These functions range from reading and clearing fault codes to displaying live measured values, performing actuator tests, and executing programming or adaptation functions for ECUs, immobilizers, and airbags. Operating via an OBD-II or manufacturer-specific connector, Lexia hardware works in tandem with specialized software like Diagbox to deliver accurate, in-depth vehicle insights.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
The Lexia 3 tool is primarily designed for Peugeot and Citroën vehicles manufactured from approximately 2007 to the present. Older pre-2007 vehicles utilizing K-line may not be fully supported without specific adapters.
The software is typically compatible with Windows 7 and Windows 10 operating systems. For best performance, follow the provided installation guides carefully.
Yes, the scanner can read all stored and pending fault codes with descriptions, and also allows you to clear stored fault codes and diagnostic information from the vehicle's ECU.
Yes, for newer models such as the Nemo, Boxer III, and Jumper III, an S.1279 module is often required to connect the Lexia 3 interface to the vehicle.