KPerformance Manuals & User Guides

KPERFORMANCE DIY r2 Motronic DIY Basis PCB User Manual Introduction Congratulation for buying the Motronic board. The circuit is based on MegaSquirt 3 and pinout of the KdFi1.4 modules. Making…

KPERFORMANCE M20 SM3+ PnP Models Product Information The SM3+ PnP is an ECU (Engine Control Unit) manufactured by KPerformance. It is based on the Megasquirt 3 circuit and is built…

KPERFORMANCE Tiny O2 Controller Product Information The Tiny O2 Controller is a device designed by Kperformance. It is a pre-canbus release version of the controller, which means it does not…

Motronic/Wire-in DIY Base r2 User Manual KperformanceMotronic/Wire-in DIY r2 User manual Software,drivers and latest info can be downloaded at www.Kperformance.be Introduction Congratulation for buying the base board. The circuit is…

SM3+ ECU r1.5b User Manual Kperformance SM3+ ECU User manual Software,drivers and latest info can be downloaded at www.Kperformance.be R1.5b november 2022 Introduction Congratulations buying the SM3 ECU. The circuit…

KPerformance SM3 ECU Full Replacement for the Original EFI System User Manual Introduction Congratulations buying the SM3 ECU. The circuit is based on Megasquirt 3. It was refined build 100%…

Comprehensive user manual for the Kperformance SM3+ engine control unit (ECU), detailing its features, pinouts, electrical connections, onboard components, and operational guidance.

Comprehensive user manual for the Kperformance Motronic DIY Base r2 ECU, detailing installation, configuration, pinouts, and features for engine management systems. Compatible with MegaSquirt and KdFi.

Comprehensive user manual for the Kperformance Motronic/Wire-in DIY Base r2 circuit board, covering installation, connections, pinouts, software setup, and operational features for engine management systems.

User manual for the Tiny O2 Controller CAN-bus, detailing installation, electrical connections, sensor setup, and TunerStudio configuration for optimal performance monitoring.