Konect Manuals & User Guides

Konect supplies electronics and accessories for radio-controlled models, including transmitters, receivers, brushless motors, batteries and LiPo battery straps.

Browse model-specific manuals for setup, receiver pairing, steering and throttle adjustments, and battery installation. Check your product's model number before using a guide.

This category also includes the CUL 37800 motorized extension socket. Its connection to the RC brand is unconfirmed; select documentation by exact model.

• How do I choose the correct Konect manual?

  Match the model number on your product or packaging to the manual title, such as KT3X, KR3X or CUL 37800. Products sharing the Konect name may not belong to the same manufacturer.

• Why does my KT3X transmitter flash red and green at startup?

  The manual describes a safety shutdown if the steering wheel or throttle trigger is moved while switching on. Turn the transmitter off, then switch it on again without touching either control.

• What batteries does the KT3X transmitter use?

  The KT3X uses three 1.5 V AA batteries. Install them according to the polarity markings in the battery compartment.

• Where can I obtain warranty or registration help?

  No verified warranty or registration page is available in the supplied information. Contact the seller with your model number and proof of purchase for applicable terms and assistance.

• How should I fit the 280 mm LiPo strap?

  Place the battery in the compatible compartment, wrap the strap flat around it and secure the fastening surface. Check that the battery cannot shift, without tightening enough to damage its casing.