KNECT provides point-to-point wireless bridges for access control, linking readers and control panels with Wiegand and OSDP data and optional cloud monitoring.
KNECT offers point-to-point wireless bridges for access control systems, including the KEP-202 Endpoint Pair for transmitting Wiegand and OSDP data between central and remote devices.
Browse manuals and quick-start guides for wiring, DIP switch configuration, pairing, LED indicators and optional Aether RF IoT monitoring. Check your model's installation requirements before mounting or connecting power.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
The available guide covers the KEP-202 Point to Point Wireless Bridge Endpoint Pair, including wiring, configuration, pairing and testing.
The guide instructs installers to designate one endpoint as Central and the other as Remote using DIP switch 4, then follow the power-cycle and pairing procedure.
For optional cloud monitoring, the guide requires Ethernet at the Central unit only. The Remote unit does not need an Ethernet connection.
The Status LED flashes once every five seconds when paired and twice every five seconds when no device is paired. The Test/Pair button can send a test transmission to check signal strength.
No. The guide explicitly states that KNECT endpoints are not water resistant. Follow its mounting instructions and protect the equipment from water.
The guide recommends registering your organization with the Aether RF IoT platform at https://AetherRFiot.com/register/dealer before onboarding. This is platform registration, not a confirmed product warranty registration service.