KINGROON specializes in affordable 3D printers, high-quality filaments, and essential 3D printing accessories for both beginners and pro enthusiasts.
KINGROON is a popular manufacturer of affordable and reliable 3D printing solutions. Based in Shenzhen, China, the brand offers a wide range of products including FDM 3D printers like the KP3S and KLP1 series, various high-quality 3D printing filaments (PLA, PETG, TPU, ABS), and essential accessories like filament dryer boxes, power supplies, and mechanical parts. KINGROON is dedicated to making 3D printing accessible to hobbyists, makers, and professionals worldwide with cost-effective, high-precision equipment.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
User manuals, slicing software configuration files, and setup instructions can typically be found on the USB drive included with your printer or by contacting KINGROON customer support.
Using a filament dry box like the KINGROON K-02, PLA and TPU should be dried at 40°C for 4-8 hours, PETG at 50°C, and ABS at 60°C.
For the KLP1, select the auto-leveling function which performs a 36-point automatic leveling. Adjust the Z-offset using a piece of A4 paper until there is slight resistance.
KINGROON offers a 15-day return or exchange policy for devices purchased directly from their official website. Be sure to check their warranty page for specific terms regarding third-party purchases.