Kentec Manuals & User Guides

Kentec K1810 Sigma A-XT Releasing Fire Control Panel Instruction Manual

December 26, 2025

K1810 Sigma A-XT Releasing Fire Control Panel Product Specifications Product Name: Sigma A-XT Releasing Fire Control Panel Model Number: Man-1145 (K1812-00) Revision: E04.00 Manufacturer: Kentec Electronics Ltd. Standards: Underwriters Laboratories…

kentec BS 5839 Grade A LD2 Fire Alarm System User Guide

September 30, 2025

kentec BS 5839 Grade A LD2 Fire Alarm System Specifications Product Name: Fire Detection and Fire Alarm System Model: BS5839-1:2025 Standards: BS5839-1:2025 Regulatory Compliance: Regulatory Reform (Fire Safety) Order 2005…

Kentec MAN-1611 Matrix Surface Fire Alarm Mimic Display User Manual

August 18, 2025

K-Detect-iON User Manual MAN-1611 Matrix Surface Fire Alarm Mimic Display Copyright: Copyright © 2025 Kentec Electronics. All rights reserved. Reproduction without permission is prohibited. Trademarks: K-Detect-iON is a licensed trademark…

Kentec PR1155 Vizulinx Alarm Management Module Instruction Manual

August 16, 2025

Kentec PR1155 Vizulinx Alarm Management Module Instruction Manual In line with our program of continuous product development Kentec have released a new version of firmware for the Vizulinx Alarm Management…

Kentec AMX Network Manager Instructions

January 27, 2025

Kentec AMX Network Manager Introduction The Kentec/Hochiki network manager is specifically designed for use with the following Kentec and Hochiki panel brands: Kentec Syncro AS Elite RS OEM branded variants…

Kentec KS-CALL-POINT-SCI Addressable Call Point with Short Circuit Isolator Instruction Manual

January 23, 2025

Kentec KS-CALL-POINT-SCI Addressable Call Point with Short Circuit Isolator Instruction Manual Features Fast response Integral short-circuit isolator (SCI) Bi-colour status LED Non-frangible element Electronically addressed Surface or semi-flush mountable Optional…

Kentec IPC8645EA-ADZKM-I1 Multi Sensor Dome Camera Owner’s Manual

January 23, 2025

Kentec IPC8645EA-ADZKM-I1 Multi Sensor Dome Camera Specifications Ordering Code and Description: KS-SOLO-ZONE-SCI Operating Voltage: 24 VDC Current in Short Circuit: 8.5mA Max No. of Detectors per Zone: Varies based on…

Kentec KS-DUAL-ZONE-SCI-IS Addressable Dual Zone Monitor For IS Devices Owner’s Manual

January 23, 2025

Kentec KS-DUAL-ZONE-SCI-IS Addressable Dual Zone Monitor For IS Devices Product Usage Instructions Installation Ensure the power source is 24 VDC. Connect the unit to compatible IS barriers using appropriate wiring.…

Kentec KS-DUAL-ZONE-SCI Addressable Dual Zone Monitor with SCI Owner’s Manual

January 23, 2025

Kentec KS-DUAL-ZONE-SCI Addressable Dual Zone Monitor with SCI Specifications Operating Voltage: Varies E.O.L device options: Available Output rating: 24V 8.5mA Max no. of detectors per zone: Varies based on detector…

Kentec KS-CALL-POINT-W-SCI Weatherproof Addressable Manual Call Point Owner’s Manual

January 23, 2025

Kentec KS-CALL-POINT-W-SCI Weatherproof Addressable Manual Call Point Product Usage Instructions Mount the KS-CALL-POINT-W-SCI on a suitable surface using appropriate hardware. Connect the call point to the Kentec Taktis or Syncro…

Kentec Elite RS Firmware Release Bulletin 07020345 - Improvements and Updates

release notes

Official firmware release bulletin from Kentec Electronics Ltd. detailing version 07020345 for Elite RS fire alarm control panels, including improvements for onboard diallers and Hochiki ALO-V smoke detectors.

Sigma A-CP Conventional Fire Control Panel: Installation and Operation Manual

manual

Comprehensive guide for installing, operating, and maintaining the Kentec Sigma A-CP Conventional Fire Control Panel. Covers features, specifications, and troubleshooting for fire detection systems.

BS 5839 Part 1:2025 - Fire Detection and Fire Alarm Systems for Buildings Guide

guide

Comprehensive guide to BS 5839 Part 1:2025, covering fire detection and fire alarm systems for buildings, including regulatory context, system categories, detector positioning, and installation requirements, from Kentec.