Juke Audio makes multi-room streaming amplifiers, architectural speakers and audio adapters for app-controlled music and TV sound throughout homes and buildings.
Juke Audio makes multi-room streaming amplifiers, architectural speakers and audio adapters for whole-home listening.
Find user manuals and installation guides for amplifier wiring, network setup, app controls, speaker installation and AudioMate connections. Features and connections vary by model, so use the guide that matches your equipment.
For additional help, visit the official Juke Audio support center.
Selected manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Browse this category for your model's manual or installation guide. Additional setup and troubleshooting guidance is available at https://support.jukeaudio.com/.
Download Juke Audio from the Apple App Store or Google Play Store. Connect your amplifier and phone to the same local network, then follow the app's onboarding instructions to configure and name your zones.
Both connection methods are supported on the amplifiers described here. The installation guides recommend Ethernet when available for the most stable connection. Follow your model's manual for Wi-Fi setup.
First configure a Juke Audio amplifier on your network. Power the AudioMate, add it through the administrator section of the Juke app and connect it to the same local network as the amplifier.
Use Run Zone Tests in the Juke app's administrator diagnostics to check connections. Refer to your model's wiring guide for polarity and impedance requirements, and switch off equipment before adjusting wiring.
Use the official contact form at https://jukeaudio.com/contact/ to ask about warranty terms or whether registration is required for your product.
