Jaga is a leading manufacturer of innovative, energy-efficient heating, cooling, and ventilation convector systems, including Micro and Clima Canals.
Jaga is an independent, family-owned European company specializing in high-performance, energy-efficient heating, cooling, and ventilation solutions. Founded in 1962 and headquartered in Diepenbeek, Belgium, Jaga focuses on innovative climate design that minimizes environmental impact while maximizing indoor comfort.
Known for its ultra-light, responsive heat exchangers, Jaga's product line includes the award-winning Micro Canal, Clima Canal, and Hybrid heating units. These systems are designed to integrate seamlessly into modern architecture through trench and wall-mounted setups, often operating with 50% less power by utilizing advanced EC-motors. Covering both residential and commercial applications, Jaga systems provide optimal thermal comfort equipped for low water temperature systems, such as heat pumps, ensuring a sustainable path to Net Zero.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Yes, the Jaga Micro Canal and Clima Canal series are designed specifically to function as both a powerful heater and cooling unit, seamlessly switching between the two.
Yes, Jaga highly recommends that all units be installed by certified technicians in accordance with local building codes to prevent product failure, reduced performance, or voiding the warranty.
The serial number is tagged on the unit's right side, or on the left side if the hydraulic/electrical connections are located on the unit's right side.
The grille should never be disassembled for routine maintenance. It can be easily cleaned using a standard vacuum cleaner at regular intervals depending on room usage. Do not use solvent- or detergent-based products.
The heater includes a manual high limit that shuts it down if it exceeds the internal temperature limit. Turn the heater off, check for obstructions, use a vacuum to remove dust, and press the reset button. If problems persist, consult a qualified technician.