InteliSwab, manufactured by OraSure Technologies, provides easy-to-use, rapid COVID-19 antigen tests designed for both professional and at-home diagnostic testing.
InteliSwab is a leading brand of rapid COVID-19 antigen tests developed and manufactured by OraSure Technologies. Designed for both at-home, over-the-counter use and professional healthcare settings, InteliSwab tests are recognized for their simplicity, reliability, and accurate results. The user-friendly design requires minimal hands-on time, featuring a built-in swab that users simply swipe in their nostrils, swirl in a pre-measured solution, and read directly from the unit's test window.
Approved under Emergency Use Authorization (EUA) by the FDA, InteliSwab tests do not require complex instruments, batteries, or smartphone applications. Whether testing for personal safety, workplace compliance, or healthcare screening, the InteliSwab COVID-19 Rapid Test provides a fast and highly accessible diagnostic tool for individuals monitoring active infections.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Swab both nostrils around the inside wall 15 times each using the built-in flat pad. Insert the device into the tube, stir 10 times, leave it in the tube, and read your results between 30 and 40 minutes.
Results should be interpreted precisely between 30 and 40 minutes after inserting the device into the Developer Vial. Reading before 30 minutes or after 40 minutes may result in false results.
If the developer solution spills at any point during testing, it may cause invalid results. You must discard the test and repeat the process using a brand-new test kit.
No, the reddish-purple line next to the 'C' (Control Zone) only demonstrates that the fluid appropriately migrated through the test strip, not that an adequate nasal sample was collected. Be sure to carefully follow the swabbing instructions provided in the manual.