📘 Innr manuals • Free online PDFs
Innr logo

Innr Manuals & User Guides

Innr is a Dutch manufacturer of affordable smart lighting products, offering Zigbee-compatible bulbs, light strips, and accessories that integrate with Hue and Alexa.

Tip: include the full model number printed on your Innr label for the best match.

Innr manuals

Selected manuals from manuals+ curated for this brand.

Additional documents are a limited selection. Search all manuals.

Innr SP 220 Smart Lighting User Manual

June 28, 2022
Innr SP 220 Smart Lighting User Manual Instruction Put Smart App in "search" mode Factory Reset Press and hold Declaration of conformity Hereby, Innr Lighting BV declares that the radio…

innr SP220 3PACK smart lighting User Guide

June 23, 2022
© Innr Lighting B.V. 2018 www.innr.com To connect the lamp to the bridge, follow the instructions in the mobile app. Factory-reset: switch the lamp OFF and ON six times (6x)…

innr E27 Smart LED Bulb Instructions

May 20, 2022
innr E27 Smart LED Bulb To connect the lamp to the bridge, follow the instructions in the mobile app. Factory-reset: switch the lamp OFF and ON six times (6x) with…

innr App User Guide

February 15, 2022
innr App INSTALATION Download the Innr app. You’ll use it to set up the bridge and control your lights. Connect the Innr bridge to your home WiFi network. Open the…

innr OFL 22x C Smart Lighting User Guide

February 15, 2022
innr OFL 22x C Smart Lighting ACCESSORIES System Overview Attention  Installation Connection To connect the lamp to the 11:.1.11 bridge, follow the instructions in the mobile app. Factory reset Important…

innr OFL 24x C Smart Outdoor Flex Light User Guide

February 15, 2022
innr OFL 24x C Smart Outdoor Flex Light ACCESSORIES System Overview Attention  Installation Connection To connect the lamp to the bridge, follow the instructions in the mobile app. Factory reset …

innr BG220 Zigbee Bridge Instruction Manual

January 30, 2022
innr BG220 Zigbee Bridge Instruction System Overview Installation/ Installation Download the "inner" app and open the app. Press"+" and "Add Device". Scan the QR code on the bridge. Power on…