📘 HX-2S-D01 manuals • Free online PDFs

HX-2S-D01 Manuals & User Guides

The HX-2S-D01 is a generic model designation for 2-series lithium-ion battery management system (BMS) protection boards used in DIY electronics.

Tip: include the full model number printed on your HX-2S-D01 label for the best match.

About HX-2S-D01 manuals on Manuals.plus

The HX-2S-D01 is a widely utilized Battery Management System (BMS) module designed for 2-series (2S) lithium-ion or lithium-polymer battery packs (7.4V / 8.4V). While not a brand in the traditional consumer sense, this model designation refers to a specific design of protection circuitry manufactured by various generic electronics producers. The board is essential for ensuring the safety of rechargeable battery packs by monitoring voltage levels and preventing common hazards.

Key features of the HX-2S-D01 typically include overcharge protection, over-discharge protection, and short-circuit protection. It is frequently employed in hobbyist projects, power tool battery repairs, and portable electronic device power supplies using 18650 cells. Due to its open-market manufacturing, specifications regarding maximum continuous discharge current can vary slightly between batches, though it is generally rated for low-to-medium power applications.

HX-2S-D01 support FAQ

Common questions about manuals, registration, and support for this brand.

  • What is the charging voltage for the HX-2S-D01?

    For a 2S (2-series) lithium-ion configuration, the charging voltage is typically between 8.4V and 9V.

  • How do I wire the HX-2S-D01 to the batteries?

    Standard wiring usually involves connecting the 0V (B-), 3.7V (BM/middle connection), and 7.4V (B+) points to the corresponding battery terminals, while P+ and P- serve as the input/output.

  • Does the HX-2S-D01 provide balance charging?

    Basic versions of the HX-2S-D01 usually provide protection (overcharge/discharge/short), but may not include active balancing circuitry. Check your specific module variant.

  • What is the maximum discharge current?

    While ratings vary by manufacturer, standard HX-2S-D01 modules often support a continuous discharge current in the range of 5A to 10A.