HOVER encompasses a range of consumer electronics, including Hover-1 electric rideables and Hover Camera self-flying drones by Zero Zero Robotics.
The HOVER brand category covers a diverse lineup of high-tech consumer electronics. This includes the highly popular Hover-1 series of electric rideables, such as hoverboards and e-scooters. Additionally, it features instructions and guides for Hover Camera (also known as HoverAir), an innovative series of self-flying portable camera drones developed by Zero Zero Robotics.
Whether you need to troubleshoot your electric scooter, learn how to calibrate your pocket-sized drone, or understand the safety features of your hoverboard, this category provides comprehensive user manuals, setup guides, and safety instructions for your devices.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Ensure the hoverboard is completely leveled on a flat surface and powered off. Press and hold the power button for several seconds until the indicator lights begin to flash. Keep it still until calibration completes, then turn the unit off and back on again. Consult your specific model's manual for precise calibration steps.
Select your desired flight mode using the mode button, hold the drone horizontally in your hand, and press the power button. The propellers will spin, and you can release it from your palm to start the automated flight.
Verify that the charger is plugged into a working wall outlet and securely connected to the scooter's charging port. Only use the original Hover-1 charger supplied with the unit. If the charger's indicator light does not turn on or change color, the charger or the battery itself may require replacement.
Open the Hover X1 App and power on the drone. Tap the camera page in the app, enable Bluetooth, and search for the nearby device. If it is not found, hold the Power and Mode buttons for 3 seconds until the status indicator blinks blue to enter pairing mode.