Hope Industrial Systems manufactures rugged industrial monitors, touch screens, and workstations designed to withstand harsh manufacturing environments.
Hope Industrial Systems (HIS) is a leading manufacturer of ruggedized industrial displays and workstations. Based in the United States, the company specializes in producing industrial monitors, touch screens, and commercial enclosures rated for NEMA 4/4X (IP65/66) protection. Their products are engineered to operate reliably in demanding environments, including food and beverage processing, pharmaceutical manufacturing, and general process control industries where wash-downs and airborne contaminants are common.
The HIS product line includes universal mount monitors, pedestal mounts, wall yokes, and industrial PC enclosures. Unlike consumer-grade electronics, Hope Industrial Systems' equipment is built with long product lifecycles and field-serviceability in mind. They support a variety of connection standards and offer specialized solutions for hazardous locations (Class I, Division 2).
Selected manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Multi-Touch Resistive and PCAP models are typically pre-calibrated and do not require specific driver installation for most modern operating systems. However, Single-Touch Resistive models often require a driver for calibration and advanced configuration.
Yes, many Hope Industrial Systems monitors are rated for use in Class I, Division 2, Groups A, B, C, and D; Class II, Division 2, Groups F and G; and Class III locations. Always check the specific ratings on your model's label or manual.
Most HIS industrial monitors support both AC (100–240 VAC) and DC (10.8–26.4 VDC) power inputs. Note that only one power source should be connected at a time.
Installation involves creating a mounting pattern on your wall surface, securing the arm bracket using appropriate bolts (often not included), and then attaching the monitor yoke to the arm using the provided hardware. Refer to the specific YA Series manual for dimension diagrams and bolt specifications.