HMI Adapter Plate supplies steel and stainless steel adapter and cover plates for fitting panel meters and industrial interfaces into existing control panel cutouts.
HMI Adapter Plate, LLC supplies steel and stainless steel adapter plates and cover plates for industrial control panels, including DIN panel meter installations.
Find installation guidance for parts such as the AP1049-1048-IN, a 1/4 DIN to 1/8 DIN adapter plate. Match your full part number and material to the guide before checking mounting hardware, gasket installation, tightening torque and enclosure ratings.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Match the full part number and material of your plate to the guide. The AP1049-1048-IN guide covers a 1/4 DIN to 1/8 DIN adapter plate.
The guide specifies 24 in-lb (2 ft-lb) for the locknuts. The plate should be secure with the gasket evenly compressed; avoid overtightening.
The guide recommends applying anti-seize to studs and locknuts to reduce galling. Avoid high-speed drilling and excess force, finish tightening by hand, and avoid impact guns that could damage the studs.
Contact HMI Adapter Plate at Sales@HMIAdapterPlate.com or +1 610-871-0811. Have your plate's full part number available.
The supplied installation guide does not identify warranty terms or a registration process. Contact HMI Adapter Plate directly for details applicable to your purchase.