Hetronic specializes in safety radio remote control systems for industrial machinery, providing rugged wireless solutions for cranes, construction, and specialized equipment.
User Manuals, Instructions and Guides for HETRONIC products.
Hetronic is a globally recognized manufacturer of safety radio remote control systems, serving the industrial equipment market for over three decades. The company specializes in designing and building rugged wireless control solutions for a wide range of applications, including construction cranes, locomotive control, mining machinery, and mobile hydraulic equipment.
Committed to operator safety and operational efficiency, Hetronic utilizes frequency hopping spread spectrum (FHSS) technology to ensure reliable communication even in environments with high radio interference.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
For many handheld units like the HH TC-1A, place the transmitter in the docking station. A yellow light typically indicates charging has begun, and a green light indicates the cycle is complete. If the unit does not operate, verify the battery is correctly inserted and charged.
If the Emergency Stop system does not function properly, stop the machinery immediately and DO NOT use the radio remote control system. Contact your dealer or Hetronic service center for repairs immediately.
Unscrew the battery cap from the transmitter’s battery tube. Insert the correct rechargeable battery (e.g., Hetronic Battery HH LiFePO4 3.2V 3.3Ah) with the black ring facing into the tube, then reinstall the battery cap securely.
While modules like the CSM2400FH are pin-compatible with some legacy radios, settings and adjustments are typically performed by factory-trained personnel during the manufacturing process. No final adjustments are usually required by the end-user.
Check for large metal obstructions between the transmitter and receiver, or verify the condition of the batteries. If the issue persists, the receiver antenna orientation or location may need adjustment.