HereLink provides advanced HD video transmission systems, air units, and remote controllers designed for professional drone and UAV command, control, and telemetry.
HereLink is a premier provider of HD video transmission systems and command-and-control equipment for UAVs and drones. Developed in partnership with industry leaders like CubePilot and NW Blue, HereLink systems deliver high-definition 1080p video at up to 60fps, ultra-low latency (min 110ms), and extensive transmission ranges of up to 20km.
At the core of their offerings are the HereLink Air Units and Controller Units, powered by integrated SOC Pinecone S1 processors. Featuring dual HDMI inputs, UART, and S.bus interfaces, HereLink systems seamlessly integrate with standard flight controllers to provide simultaneous, real-time video and telemetry data transmission.
Whether utilizing the standard HereLink Black or the US-assembled HereLink Blue, drone operators benefit from a comprehensive ground control station experience. Controllers are equipped with a bright 5.46-inch capacitive touchscreen running QGroundControl, built-in dual microphones, long-lasting 4950mAh batteries, and customizable physical buttons for highly tailored flight operations.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Check if the HDMI output resolution is set to 1080P, as the QGC (QGroundControl) resolution setting must be consistent with your camera's resolution. Also, double-check the HDMI connection or replace the HDMI cable if the issue persists.
The HereLink Air Unit requires a power input of 5V - 12.6V max (3s Lipo supported). Warning: Connecting it to any power range above this limit will permanently damage and burn the device.
Currently, HereLink only enables 5.8GHz WiFi for internet connectivity. To load maps or access the internet, you must connect the controller to a 5.8GHz WiFi network.
Yes, the system language can be switched in the Android slide-down menu. However, the default QGroundControl (QGC) application is locked to English and cannot be changed.