Provides comprehensive installation guides and user manuals for a variety of motorcycle and bicycle handlebars, including custom ape hangers.
Handlebar provides detailed installation instructions, user manuals, and safety guides for motorcycle and bicycle handlebars. Proper installation of handlebars, such as 12-inch rise ape hangers, is critical for rider safety and vehicle control.
These instructional guides cover essential procedures including the removal of original handlebars, routing internal wiring, installing hand controls, connecting electrical components, and performing required safety checks. Whether replacing standard handlebars or upgrading to custom heights, these manuals ensure secure fitment and safe operation on the road.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Bundle the wiring together, tie a pull cord to the bundle, and carefully route it through the top holes of the handlebar and out the bottom center hole. Using a wire lubricant can help navigate tight corners.
Yes, if you are upgrading to a taller handlebar like 12-inch ape hangers, you will likely need longer clutch, brake, and throttle lines to accommodate the increased height.
According to standard installation guides, you should seat the handlebar with the knurled area centered and tighten the riser clamp bolts to a torque of 17-21 N.m. Always verify this spec with your specific motorcycle's manual.
While many riders choose to install handlebars themselves, the process involves disconnecting critical control lines like brakes, clutch, and throttle. If you are unsure about the steps, it is highly recommended to consult a certified mechanic as safety is paramount.