HALO DETECT Manuals & User Guides
HALO DETECT, manufactured by IPVideo Corporation, provides industry-leading smart sensors for vape detection, air quality monitoring, and overall environmental safety.
About HALO DETECT manuals on Manuals.plus
HALO DETECT Manuals and Support
HALO DETECT, manufactured by IPVideo Corporation, is an industry-leading provider of smart environmental sensors designed to enhance health, safety, and security. Best known for their award-winning vape detection capabilities, HALO smart sensors also monitor air quality, detect abnormal noise levels, and provide people counting functionality without the use of video or audio recording, ensuring complete privacy.
Their flagship devices, including the HALO-2C and HALO-3C, are widely utilized in schools, corporate spaces, and public buildings to monitor environments for smoke, chemicals, and safety anomalies. Browse our directory for installation guides, device manager setups, and placement instructions.
HALO DETECT manuals
Selected manuals from manuals+ curated for this brand.
Additional documents are a limited selection. Search all manuals.
Elite1B Outdoor Countertop Griddle
HL3 Downlight Series
Prime1500 Outdoor Pellet Grill
RL4 Smart Wi-Fi LED Downlight
911 INFORM INTEGRATION
H457RICAT1E 4 Inch LED Gen 2 Recessed Light
LT4-DM Phase Cut
HL36AR 3 Inch Round Shallow Directional Remodeler LED
HL36SAR Square Recessed Lighting
DEVICE MANAGER (HDM) MANUAL
4791
Device Manager
HALO DETECT support FAQ
Common questions about manuals, registration, and support for this brand.
-
Where should I place my HALO sensor for vape detection?
It is recommended to place the HALO sensor on a ceiling at a height of 8 feet in an area relatively free of air currents. Avoid placing near HVAC exhaust, fans, or doors between rooms.
-
What network connection does the HALO DETECT sensor require?
The HALO unit requires a wired Ethernet connection that provides standard 802.3af PoE power. The cable run should not exceed 300 feet (100 meters).
-
How do I know if my HALO sensor is properly connected?
After plugging in the network cable, wait 10-15 seconds. The green LED in the lower left corner should begin blinking, indicating a good network connection and power availability.
-
How do I configure my HALO sensor after installation?
Use the HALO Device Manager (HDM) software on a Windows computer to adjust the unit's network configuration according to your facility's network plan.