Gulf Stream offers pool and spa heat pumps manufactured by G&F Manufacturing, with controls for water temperature management and guides for installation and use.
Gulf Stream manufactures pool and spa heat pumps through G&F Manufacturing, including the HE 150 and selected heating and cooling models.
Browse available manuals for installation requirements, temperature controls, plumbing guidance and troubleshooting. Always match the guide to your equipment model and leave electrical installation and service settings to qualified professionals.
For installation assistance, the supplied guides list the Heat Pump Services Department at +1 954-318-6900.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Choose the guide that matches your heat pump model and features. Heating-only and heating/cooling models may have different operating instructions.
The supplied installation guides list the Heat Pump Services Department at +1 954-318-6900. Electrical installation must be performed by a qualified electrician in accordance with local codes.
The installation guides identify the rating plate on the bottom front of the unit's base pan as the location of electrical requirements.
For the controls described in the supplied guides, use Mode to select Pool or Spa, then use the Up and Down arrows to adjust the temperature set point. Consult your model's manual before making changes.
Visit https://www.gulfstreamheatpump.com/warranty/ and review the warranty documentation supplied with your unit. The installation guides instruct installers to give the homeowner the warranty card and homeowner manual.