FLIGHTORY specializes in designing 3D-printed RC aircraft and VTOL drone platforms, providing downloadable STL files for hobbyists to build their own models.
FLIGHTORY is an innovative aerospace brand founded by engineer Szymon Wójcik, dedicated to the design and development of 3D-printed Unmanned Aerial Vehicles (UAVs) and RC model aircraft. Specializing in advanced platforms like the Super Stingray and Stallion VTOL, the brand provides high-quality digital assets—including STL and STEP files—that enable hobbyists and professionals to manufacture airframes using standard consumer 3D printers.
Deeply rooted in the maker and RC community, FLIGHTORY offers comprehensive build guides, configuration tutorials for flight softwares like ArduPilot, and active technical support through community channels. By focusing on accessible materials like LW-PLA and PETG, FLIGHTORY democratizes access to sophisticated fixed-wing and hybrid VTOL drone technology.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Most Flightory designs are optimized for LW-PLA (Lightweight PLA) for wing sections to maximize flight time, and PETG or materials with carbon fiber additives for structural components like motor mounts and booms.
No, Flightory primarily sells digital design files (STL/STEP). Customers must 3D print the parts themselves and source their own electronics, motors, and flight controllers.
Flightory recommends ArduPilot for configuring their VTOL (Vertical Take-Off and Landing) aircraft, as it supports the complex transitions required for quadplane and tilt-rotor designs.
Support is largely community-driven via the official Flightory Tech group on Facebook and their Discord server, where the designer and other builders share tips and troubleshooting advice.