FASELASE specializes in industrial 2D LiDAR scanners, laser sensors, and point cloud data acquisition systems for automation and obstacle detection.
FASELASE is a leading brand in the development and manufacturing of industrial 2D LiDAR scanners and precision obstacle sensors. Distributed by Xi’an Zhizun International Trade Co., Ltd. (Top1Sensor), their product lineup includes popular models such as the F20, F6, D6, and S-Series LiDAR devices. These sensors are widely utilized in industrial automation, robotics, intrusion detection, and specialized point cloud data acquisition systems.
Designed for reliability in demanding environments, FASELASE LiDAR devices offer 360-degree scanning, fast frequency responses, and robust enclosure ratings. Users can integrate these scanners using TCP/IP, USB, or TTL interfaces. Comprehensive support, including driver downloads, data analysis software, and detailed user manuals, ensures optimal setup and performance.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Drivers and point cloud data acquisition software can be downloaded directly from the Top1Sensor website. Connect the device via USB only after the driver is installed to prevent PC freezing.
The factory default IP address is typically 192.168.0.100 or 192.168.0.90, depending on the model. This can be modified through the system settings after successfully establishing a connection.
Ensure that your power supply meets the starting current requirements (usually greater than 1A or 1.5A at 12V). If the starting current is too low, the device will fail to boot normally.
A solid red LED indicator typically signifies a fault or error status. Check your power supply and connections, and consult the troubleshooting section of your user manual.