User manuals and technical documentation for generic and white-label Electric Vehicle chargers, including the XT series of Type 2 AC portable charging stations.
The EV Charger category encompasses a wide range of generic, unbranded, and white-label electric vehicle charging solutions often found on global marketplaces. This collection specifically includes documentation for the XT series of charging posts and portable Type 2 AC chargers (22kW). These devices are designed for versatility, typically supporting operating voltages of 400Vac with adjustable current settings up to 32A.
Common features of these chargers include IP65 waterproof ratings, lightning protection, and comprehensive safety protocols such as overvoltage, undervoltage, overcurrent, and leakage protection. The manuals provided in this section cover installation procedures, menu navigation for setting power levels and reservation times, and detailed troubleshooting guides for LED error codes (e.g., specific flash patterns indicating faults like grounding issues or over-temperature).
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
If the red light flashes 5 times (Error Code E05), it indicates a Grounding issue. You should check that the outlet is properly grounded before continuing use.
To adjust the current, long press the button on the Standby Interface for 2 seconds to enter the Menu. Select the 'POWER' submenu, long press to enter, short press to switch the current level, and long press again to save and exit.
If the indicator light is off, check the front-end input power lines to ensure the unit is receiving power. Also inspect the AC cable for breaks or loose connections.
No. The manual strictly warns against using additional cords, adapters, or adaptors to avoid safety risks and equipment failure.
The technical indicators specify an operating temperature range of -25℃ to +50℃.