Escea designs and manufactures innovative indoor and outdoor gas, wood, and electric fireplaces. Proudly built in New Zealand, they offer unmatched heating efficiency.
Escea is a premier manufacturer of high-quality indoor and outdoor fireplaces, proudly designed and built in the deep south of New Zealand. Their product range includes highly efficient gas, wood, and electric fireplaces, celebrated for both their sleek aesthetics and advanced heating capabilities. Signature innovations, like their Direct Vent Technology, ensure that indoor fireplaces draw air from the outside rather than using room air—making them exceptionally efficient without sacrificing interior comfort.
From freestanding and inbuilt wood burners to advanced zero-clearance gas models, Escea provides powerful heating solutions tailored for modern living spaces. Their models are supported with clear installation instructions, versatile venting options, and robust warranties.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Installation manuals and CAD files for Escea fireplaces can be found in the technical section of their website at www.escea.com/technical.
Direct Vent Technology draws air from outside the home using a dual-layer flue to fuel the fire. This keeps the fireplace sealed to the room, preventing cold drafts while safely exhausting air back outside.
Use a suitable glass cleaner and a soft, non-abrasive microfibre cloth. Avoid abrasive materials that may scratch the glass and never attempt to clean it while it is hot.
Escea wood fireplaces are designed to burn only dry, seasoned softwood with a moisture content of 16-20%. Be sure not to burn treated, laminated, painted, or oil-contaminated wood.
Error code E3 indicates that the fireplace has overheated and shut off automatically. Wait a few minutes for it to cool down, then reset it by turning the heater off and on. If the issue persists, contact a certified service technician.