Ender Manuals & User Guides

Ender is the flagship product line of desktop 3D printers produced by Shenzhen Creality 3D Technology Co., Ltd. (Creality). Since the launch of the original Ender-3, the series has become a staple in the 3D printing community due to its modular design, ease of assembly, and extensive upgradability. The line includes various models such as the Ender-3 V2 Neo, Ender-3 S1 Pro, and Ender-5, catering to users ranging from beginners to advanced makers.

These FDM (Fused Deposition Modeling) printers are characterized by their V-slot aluminum extrusions, reliable motion systems, and compatibility with a wide range of filaments including PLA, ABS, and PETG. The Ender series emphasizes user accessibility, offering features like auto-leveling (CR-Touch), power loss recovery, and silent mainboards in newer iterations. Users are encouraged to maintain their devices regularly and utilize official firmware for the best experience.

• How do I level the bed on my Ender 3D printer?

  For models with manual leveling, use the 'Auto Home' function, then disable steppers. Move the nozzle to each corner and adjust the knobs until a piece of A4 paper slides with slight resistance between the nozzle and the bed. For models with CR-Touch, use the 'Level' function in the menu for auto-calibration, then adjust the Z-offset.

• How do I load filament into the Ender extruder?

  Preheat the nozzle to the target temperature (e.g., 200°C for PLA). Trim the filament end at a 45° angle. Press the extruder clamp handle and push the filament through the sensor and extruder gears until molten material flows from the nozzle.

• Where can I find firmware updates for Ender printers?

  Firmware updates can be downloaded from the Creality official website under the Support > Download section. Select your specific Ender model to find the correct files.

• What should I do if the nozzle is clogged?

  Heat the nozzle to 185°C or higher. Press the extrusion handle and quickly pull the filament out to remove debris (cold pull). You can also use the provided nozzle cleaner needle while the nozzle is hot.

• Why does my printer stop automatically?

  Ender printers have safety protection mechanisms. If the nozzle or platform is moved manually and quickly while powered on, or if there is a thermal runaway issue, the printer may power off automatically for protection.