e-LOOP manufactures advanced wireless vehicle detection systems and commercial loops designed to replace traditional wired inductive loops for gates and parking.
e-LOOP specializes in innovative wireless vehicle detection technology designed for commercial, industrial, and domestic applications. By replacing traditional wired inductive loops, e-LOOP systems save installation time and reduce costs while improving reliability.
The product lineup includes the e-LOOP Light Industrial and Commercial series, which offer various operational modes such as Exit, Presence, and Parking. With the e-CONNECT mobile app, installers and users can easily configure settings, manage pairings with e-TRANS receivers, and access advanced diagnostics directly from their smartphone.
Selected manuals from manuals+ curated for this brand.
Additional documents are a limited selection. Search all manuals.
Common questions about manuals, registration, and support for this brand.
For short-range coding, hold the CODE button on the receiver until the Blue LED illuminates. Hold the magnet in the e-LOOP CODE recess until the Yellow LED flashes and the receiver's Blue LED flashes 3 times, indicating successful pairing.
Ensure all metallic objects are away from the sensor. Hold the magnet in the SET recess until the Red LED flashes twice, then remove it. Calibration takes about 5 seconds, indicated by 3 flashes of the Red LED.
e-LOOP sensors feature three modes: Exit Mode (single pulse trigger), Presence Mode (latches relay open while vehicle is detected), and Parking Mode (slower latch and release with lower power use).
To reset your e-LOOP, hold the magnet on the CODE recess for 10 seconds until the Yellow LED flashes 3 times.
The e-LOOP Connect mobile application is available for download on both Android and iPhone devices, allowing access to advanced settings and diagnostics over Bluetooth or Wi-Fi.