📘 ELECRAFT manuals • Free online PDFs

ELECRAFT Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for ELECRAFT products.

Tip: include the full model number printed on your ELECRAFT label for the best match.

About ELECRAFT manuals on Manuals.plus

ELECRAFT-logo

ELECRAFT, is an American manufacturer of amateur radio (“ham”) equipment and kits, based in Watsonville, California. It was founded in 1998 by Wayne Burdick and Eric Swartz. The company’s first product was the K2 transceiver; first prototype in October 1997. Their official website is ELECRAFT.com.

A directory of user manuals and instructions for ELECRAFT products can be found below. ELECRAFT products are patented and trademarked under the brand Elecraft.

Contact Info:

Address: 125 WESTRIDGE DR. WATSONVILLE, CA 95076
Phone: 831.763.4211
Fax: 831.763.4218

ELECRAFT manuals

Latest manuals from manuals+ curated for this brand.

ELECRAFT K4-0 Remote Panel Owner’s Manual

ELECRAFT K4-0 Remote Panel Owner’s Manual

November 12, 2025
ELECRAFT K4-0 Remote Panel Rev. A1, Sept. 26, 2025 Copyright 2025 by Elecraft, Inc. Introduction The K4/0 is a compact, portable transceiver control panel, with WiFi connectivity and up to…
ELECRAFT AX1 Multi Band Whip Antenna Owner’s Manual

ELECRAFT AX1 Multi Band Whip Antenna Owner’s Manual

April 24, 2025
ELECRAFT AX1 Multi Band Whip Antenna Product Information Specifications: Model: AX1 Tripod: Built-in Mount: 1/4-20 Orientation: Straight Bands (with ATU): 20-17 m Ground Connection: Yes Base Length: 6 inches (15…
Elecraft K4D Transceiver Factory User Guide

Elecraft K4D Transceiver Factory User Guide

January 2, 2024
Elecraft K4D Transceiver Factory Product Information Specifications: Model: K4 Version: K4D (fully independent dual-receiver) Conversion Procedure: K4 to K4D Procedure Date: May 2023 Product Usage Instructions Section 1: Removing Covers…
ELECRAFT KH1 Hand Held 5 Band Transceiver User Guide

ELECRAFT KH1 Hand Held 5 Band Transceiver User Guide

December 27, 2023
ELECRAFT KH1 Hand Held 5 Band Transceiver Specifications Product Name: Elecraft KH1 Programmer's Reference Revision: A2 Date: Dec 14, 2023 Overview The Elecraft KH1 Programmer's Reference supports 100% remote control.…
KH1 Elecraft Handheld Portable Transceiver User Guide

KH1 Elecraft Handheld Portable Transceiver User Guide

December 7, 2023
KH1 Elecraft Handheld Portable Transceiver Product Information Specifications Product Name: Elecraft KH1 Programmer's Reference Revision: A Date: Oct. 20, 2023 Overview The Elecraft KH1 Programmer's Reference is designed to support…
Elecraft K4/0 Remote Panel Owner's Manual

Elecraft K4/0 Remote Panel Owner's Manual

Owner's Manual
Comprehensive guide to the Elecraft K4/0 Remote Panel, covering installation, operation, specifications, accessories, and troubleshooting for this transceiver control unit.
Elecraft K4 Programmer's Reference Guide

Elecraft K4 Programmer's Reference Guide

Technical Specification
Comprehensive reference guide detailing the remote control commands, protocol, and syntax for the Elecraft K4 transceiver. Essential for developers and operators customizing radio functions.
Elecraft K4/0 Remote Panel Owner's Manual

Elecraft K4/0 Remote Panel Owner's Manual

Owner's Manual
Comprehensive owner's manual for the Elecraft K4/0 Remote Panel, detailing its features, specifications, installation, operation, accessories, and troubleshooting for remote radio control.
KPA1500 Firmware Version 3: ATU Solution Recall Guide

KPA1500 Firmware Version 3: ATU Solution Recall Guide

Technical Specification
This document details the KPA1500 amplifier's Firmware Version 3, introducing the ATU Solution Recall feature. It explains how to configure and utilize the extended antenna numbering system for improved performance…
Elecraft KSB2 SSB Adapter Assembly and Operating Instructions

Elecraft KSB2 SSB Adapter Assembly and Operating Instructions

assembly instructions
Detailed assembly and operating instructions for the Elecraft KSB2 SSB Adapter, providing single-sideband transceive capability for the Elecraft K2 transceiver. Includes parts inventory, assembly steps, configuration, alignment, and troubleshooting.