eKube specializes in high-quality electric water softeners designed to provide soft water throughout your home, protecting plumbing and appliances from hard water.
eKube offers comprehensive water softening solutions for residential use, featuring models like the standard eKube and the eKube XL. These systems integrate directly into your mains water supply to efficiently remove hard water minerals. Designed for durability and efficiency, eKube softeners feature metered regeneration, simple installation setups, and reliable operation. With the use of tablet salt, eKube products ensure your entire home enjoys the consistent luxury of soft water.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Install the unit on a flat surface, protected from direct sunlight, wet weather, and freezing temperatures. Ensure the water temperature is between 4°C and 24°C, and that there is adequate access for periodic servicing and salt filling.
Tablet salt is highly recommended. Fill the cabinet to approximately 20 cm from the salt lid, making sure it is no higher than the top of the brine well.
The incoming water pressure must be between 2.1 bar (30 psi) and 5 bar (70 psi). If the pressure is below 2.1 bar, a suitable water pump is needed. Avoid installing if pressure exceeds 5 bar unless a pressure-reducing valve is fitted.
Plug in the transformer and wait for the screen to display 'INITIALIZING WAIT PLEASE'. Unlocking the screen by pressing 'MENU' for 3 seconds, manually step the valve to BACKWASH mode, then proceed through the BRINE, RINSE, and REFILL steps to properly start the unit.