Dragonglass Manuals & User Guides
Dragonglass is a technology manufacturer specializing in home and commercial networking solutions, including high-speed Wi-Fi 6 routers and wireless repeaters.
About Dragonglass manuals on Manuals.plus
Dragonglass Networking Solutions
Dragonglass Technology (Shenzhen) Co., Ltd. is a networking equipment manufacturer providing reliable residential and small business connectivity solutions. The brand offers a range of devices designed to provide seamless internet coverage, including dual-band Wi-Fi 6 routers, AC1200 wireless routers, USB wireless network adapters, and signal amplifiers. With a focus on user-friendly web setups, EasyMesh capabilities, and extended area coverage, Dragonglass products empower users to eliminate network dead zones and improve their streaming, gaming, and browsing experiences.
Dragonglass manuals
Latest manuals from manuals+ curated for this brand.
Dragonglass DGR7 1200M Wireless Router Installation Guide
DRAGONGLASS DGC3 2A7HY-DGC3 Wireless Network Card Installation Guide
DRAGONGLASS Pro 1200Mbps Wireless Amplifier 2.4G Wifi Repeater Pro Installation Guide
Dragonglass DGX21 Quick Installation Guide - Setup and Configuration
Dragonglass manuals from online retailers
DragonGlass DGE1 AC1200 5G WiFi Repeater User Manual
Dragonglass support FAQ
Common questions about manuals, registration, and support for this brand.
-
How do I access the Dragonglass router admin page?
Open a web browser and enter the default management IP address, typically '192.168.10.1' or '192.168.1.1', then hit Enter to access the login prompt.
-
What is the default Wi-Fi password for a Dragonglass router?
The default Wi-Fi password is often 12345678, but it is highly recommended to check the sticker on the bottom of your specific router unit as it may vary.
-
How do I reset my Dragonglass router to factory settings?
While the router is powered on, use a pin to press and hold the RESET button for at least 5 seconds until the power indicator lights turn off or blink. Release the button and wait for the router to fully restart.
-
How do I connect my device to the 5GHz Wi-Fi network?
If 'Dual-band Integration' is disabled via the admin settings, your router will broadcast two separate networks (e.g., 2.4G and 5G). Look for the network ending in '-5G' in your device's Wi-Fi list and connect using your password.