D3 Engineering develops DesignCore mmWave radar sensors and embedded software to help engineers evaluate sensing applications, configure devices, and build systems.
D3 Engineering develops DesignCore mmWave radar sensors and supporting embedded software for sensing applications.
Browse available user guides for hardware connections, software setup, data visualization, firmware programming, and regulatory information. Check your exact sensor model and guide version before following setup instructions.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Match the exact sensor model and document version. The RS-Lx432V quick start guide includes model-specific instructions and compliance notices for the RS-L6432V.
The guide specifies the sensor, a USB-C to USB-A cable, the XR21V1410 USB UART driver, a terminal program such as Tera Term, and the D3 Visualizer.
The RS-L6432V guide directs users to their downloads on the D3 Web Store for the D3 Visualizer, part number 2000127.
The guide states that the sensor comes programmed with appropriate software. Follow the programming procedure only when necessary, using the instructions that match whether a secondary bootloader is installed.
For the RS-L6432V, check that the 3V3 and 5V0 LEDs are lit, then verify the serial port and chirp configuration specified in the guide. The WARN LED indicates insufficient voltage.