CORA provides long-range LoRaWAN and Coralink IoT sensors and smart devices, including outlets, leak detectors, and door sensors for home and building automation.
CORA, developed by Codepoint Technologies, specializes in long-range, low-power IoT devices operating on LoRaWAN and Coralink wireless protocols. The CORA product lineup includes smart wall receptacle outlets, water leak sensors, door and window sensors, and temperature and humidity monitors.
Designed for smart building, home automation, metering, and logistics applications, these devices offer reliable telemetry and configurable event notifications. Whether you are monitoring environmental conditions, preventing water damage, or automating your home's lighting, CORA sensors provide highly accurate, battery-efficient performance.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Press and hold the SET button for more than 25 seconds, then release. The device will reset all parameters to factory defaults and send a reset event uplink upon rejoining the LoRaWAN network.
CORA sensors, such as the CS1000 and CS1010, support long-range, low-power LoRaWAN and Coralink wireless protocols.
Once removed from the packaging or registered via your IoT app, press the SET button once. The device will blink orange and begin issuing join requests to your available LoRa network.
A fast green blink (4 times) means it has successfully joined the network. A fast red blink (2 times) indicates it is not joined, while a slow red blink (2 times) means it is currently attempting to join.