Convoy is a popular brand of high-performance, modular LED flashlights and lighting accessories tailored for outdoor enthusiasts and everyday carry.
Convoy is highly regarded in the flashlight enthusiast community for producing durable, high-performance, and deeply customizable LED flashlights. Known for utilizing top-tier emitters like the SST40, SFT40, and Nichia 519A, Convoy offers a wide range of models including the popular S2+, M1, T3, and 21700 battery series like the S21E and L21B.
Explore our collection of Convoy flashlight user manuals to learn about operation modes, battery compatibility, component installation, and standard maintenance.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Mode switching depends on the installed driver. For models with biscotti or 12-group drivers, half-press the tail switch rapidly to cycle through modes or to enter configuration mode to select your preferred lighting group.
Battery compatibility varies by model. For instance, the S2+ typically uses 18650 batteries, the S21 series requires 21700 batteries, and the T3 is compatible with AA or 14500 batteries. Always refer to your specific user manual to ensure safe operation.
To install, unscrew the standard 18650 battery tube from the flashlight head and tail cap. Ensure the threads are clean, then carefully screw in the 18350 short tube, making sure the rectangular threads align properly to prevent cross-threading.
Flickering is often caused by loose retaining rings in the tail cap or head. Use tweezers or a pair of snap-ring pliers to ensure these rings are securely tightened. Additionally, verify that the battery contacts are clean and the battery is fully charged.