Ceyao offers protective covers for vehicle cameras, with instructions covering lens preparation, adhesive installation, compatibility checks, and routine cleaning.
Ceyao is associated with protective covers for vehicle cameras, including a two-piece front bumper camera guard set. Browse available instructions for installation, compatibility checks, cleaning, and removal.
Check the camera dimensions before fitting a guard. Clean and dry the mounting surface, align the guard without covering the lens or sensor, and install only while the vehicle is parked and turned off.
For warranty or purchase-related assistance, consult the product packaging or contact the seller.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Browse the Ceyao category on Manuals.plus for available guides, including instructions for the two-piece front bumper camera protective cover.
With the vehicle parked and turned off, clean and dry the camera area, peel off the adhesive backing, and carefully align and apply the guard without obstructing the lens or sensor. Avoid repositioning it after application.
Compare your camera size and shape with the product instructions. The listed guard specifies a 17.5 mm diameter and a 22.6 mm outer size; do not assume it fits every vehicle.
Use a soft microfiber cloth. Avoid harsh chemicals and abrasive cleaners, which may damage the coating.
Verified Ceyao warranty, registration, and support channels are not available in the supplied information. Check the packaging or contact your seller for product-specific assistance.