Provides user manuals, wiring diagrams, and setup instructions for various universal and smart ceiling fan remote controls and receiver kits.
A range of universal and smart Ceiling Fan Remote controls allows users to upgrade their existing fans with wireless convenience, app connectivity, and voice control. These remote receiver kits are commonly paired with the 'Smart Life' or 'Tuya' smartphone applications, enabling seamless integration with Amazon Alexa and Google Assistant.
Proper installation involves safely wiring the receiver unit into the ceiling fan canopy and syncing the remote to the fan. Explore our collection of wiring guides, remote pairing instructions, and troubleshooting manuals to optimize your ceiling fan setup.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
First, disconnect power at the breaker. Typically, the receiver connects inline between the ceiling wiring and the fan. The Green wire connects to the bare/ground wire. The Red wire (AC IN L) goes to the Black or Red supply wire, and the White wire (AC IN N) goes to the White supply wire. On the motor side, connect the White wire (TO MOTOR N) to the White fan wire, the Black wire (TO MOTOR L) to the Black fan wire, and the Blue wire (FOR LIGHT) to the Blue light wire.
If the remote has lost its connection, turn off power to the fan for at least 5 seconds. Turn the power back on and immediately press and hold the 'LIGHT' and 'HI' buttons (or the designated sync buttons for your model) for 5 seconds until you hear a beep or the light blinks, indicating successful pairing.
Download the 'Smart Life' or 'Tuya' app. Make sure your phone's Bluetooth and Wi-Fi are enabled on a 2.4GHz network. Reset the fan's Wi-Fi module by holding the designated pairing button for 5 seconds until it beeps or blinks. Follow the in-app prompts to add the device and connect it to your network.
First, ensure the batteries in the remote transmitter are fresh and correctly installed. Check that the wall switch providing power to the fan is turned on and that the circuit breaker has not tripped. If the issue persists, repeat the remote's learning/pairing code process.