Campbell Scientific provides rugged, reliable data loggers, data acquisition systems, and measurement instrumentation for environmental and industrial monitoring.
Campbell Scientific is a globally recognized leader in the design and manufacture of rugged data acquisition systems, measurement instrumentation, and sensors. Established to serve the needs of environmental researchers and industrial operators, the brand specializes in equipment capable of withstanding harsh environments and remote locations. Their product lineup includes the renowned CRBasic data loggers (such as the CR6 and CR1000X), soil moisture profilers like the SoilVUE series, and advanced meteorological sensors.
Known for reliability and precision, Campbell Scientific products are widely used in weather stations, agricultural research, renewable energy monitoring, and geotechnical applications. The company offers a comprehensive ecosystem of software, including LoggerNet and various EasyFlux solutions, to facilitate data collection and analysis. With a focus on long-term, unattended monitoring, Campbell Scientific supports a vast network of scientific and industrial projects worldwide.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Campbell Scientific data loggers are typically programmed using CRBasic, which is accessible via software tools such as LoggerNet, PC400, or Short Cut.
The SurfaceVue 10 should be calibrated when the road surface is dry. It requires re-calibration after initial installation, if the mounting height/angle changes, or if the road surface type changes (e.g., resurfacing).
Due to delays associated with SDI-12 communications, Campbell Scientific recommends a measurement scan rate of 10 seconds or more for RangeVue sensors.
The SoilVUE 10 should be installed in a hole created by a standard 5-cm (2-in) hand auger. It should be located away from significant RF sources, such as AC power lines and motors, to avoid interference.