Ca'Lefort specializes in premium wine coolers, beverage refrigerators, and dry aging fridges designed for home and commercial use, blending advanced cooling technology with elegant design.
Ca'Lefort is a manufacturer of high-quality refrigeration appliances, focusing primarily on wine coolers, beverage centers, and meat dry-aging refrigerators. Built for both freestanding and built-in installations, their products are designed to integrate seamlessly into modern kitchens, home bars, and entertainment areas. The brand emphasizes precise temperature control, dual-zone cooling capabilities, and sophisticated aesthetics such as stainless steel finishes, tempered glass doors, and customizable LED lighting.
In addition to wine and beverage preservation, Ca'Lefort offers specialized dry aging fridges equipped with professional-grade humidity and temperature regulation for aging meats at home or in small commercial settings. Their appliances often feature ergonomic designs, digital touch controls, and quiet operation, catering to wine enthusiasts and culinary professionals seeking reliable and stylish preservation solutions.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
To install the handle, first gently pull back the door gasket on the side where the handle attaches. Insert the provided screws through the holes from the inside of the door. Align the handle on the outside and tighten the screws with a screwdriver until secure (do not overtighten). Finally, press the door gasket back into place.
Yes, many Ca'Lefort models are designed for both built-in and freestanding installation. They feature front-venting exhaust systems that allow them to be installed flush with cabinetry, provided you leave specific clearance (typically a few millimeters) as outlined in the installation manual.
On models with multi-color lighting (such as white, blue, and amber/orange), you can typically cycle through the colors by short-pressing the lighting button on the control panel. Some models also allow you to toggle between 'Door-Triggered' mode and 'Always On' mode by holding the light button for 5 seconds.
Before connecting the appliance to power, let it stand upright for approximately 24 to 36 hours. This allows the refrigerant oil to settle properly after transportation, reducing the risk of cooling system malfunctions.