Brose develops automotive mechatronic systems, radar sensors and e-bike motors and displays to support vehicle access, motion control and assisted cycling.
Brose develops automotive mechatronic systems and e-bike drive technology, including electric motors, displays, control units and vehicle radar sensors.
Browse manuals for operating instructions, safety guidance, maintenance and troubleshooting. Match the component model carefully and consult the vehicle or e-bike manufacturer's documentation for complete system instructions.
Selected manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Match the model number on your component or its documentation to the manual title, such as E41230 for the Display Allround. Check the e-bike manufacturer's data sheet for the installed component configuration.
No. The Display Allround manual covers that component. Also read the e-bike manufacturer's instructions and manuals for the other installed drive-system components.
The R-HFA GEN1 and GEN2 sensors are factory-installed components. Their maintenance and replacement must be performed by certified workshops using appropriate diagnostic tools.
The components must be used in their intended original configuration. Follow the applicable manuals; unauthorized modifications or tuning can affect safety and void warranty claims.
Consult your vehicle or e-bike manufacturer or dealer for product-specific requirements. No official Brose warranty or registration page is identified in the available information.
