Manufacturer of intelligent HEPA cabin pressurization and air filtration systems for heavy industrial machinery, ensuring operator protection from hazardous dust and fibers.
BreatheSafe is a leading Australian manufacturer specializing in advanced air quality monitoring and cabin pressurization systems for the mining, construction, and heavy industrial sectors. Their flagship solutions, including the HEPA H14 Variable Speed Pressuriser and the OnGuard Air Quality Monitoring system, are engineered to protect equipment operators from harmful airborne contaminants such as respirable silica, dust, and asbestos fibers. By maintaining positive pressure and high-efficiency filtration within vehicle cabins, BreatheSafe ensures compliance with occupational health standards and enhances safety in hazardous working environments.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
No, the HEPA filters cannot be cleaned. They must be replaced at the end of their lifecycle or if the filter media has been damaged.
You should inspect the filter capacity indicator every 500 hours. The HEPA filter should be replaced when the capacity reaches 80% or greater.
A 'Low Pressure' alarm means the cabin is not maintaining the required positive pressure. Check that all doors and windows are closed correctly and inspect the cabin seals for potential leaks.
The Brushless Blower Motor is typically scheduled for replacement after 15,000 hours or 36 months, depending on site conditions and usage.