Discover user manuals and instructions for BMS-branded products, including battery management systems, flood sensors, and BMS Motorsports off-road vehicles.
The BMS category encompasses a diverse range of products and technical equipment, primarily focusing on intelligent Battery Management Systems (BMS), facility management sensory equipment, and BMS Motorsports recreational vehicles. Our repository includes documentation to help users safely assemble, configure, and maintain these devices.
For electronics and power equipment, you will find setup guides for Smart BMS modules, including Bluetooth application connectivity for real-time monitoring of battery strings, cell formatting, and temperature protection programming. For facility engineering, guides are available outlining the integration of retrofitted flood sensors into larger Building Management Systems (BMS) to detect and protect against relief valve discharge.
Additionally, this category includes comprehensive assembly and owner's manuals for BMS Motorsports vehicles, such as UTVs, dirt bikes, and go-karts. These guides provide step-by-step instructions on roll cage installation, battery connections, and necessary technical specifications to ensure your off-road vehicle is ready for the trail.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Assembly instructions, including roll cage, bumper, steering wheel, and battery installation, are available in the respective BMS vehicle owner's manuals provided on this page.
Download the 'SMART BMS' app from your mobile app store, ensure Bluetooth is enabled on your smartphone, open the app, and allow it to automatically scan and connect to your BMS device to view real-time data.
In most default factory configurations, the Bluetooth Smart BMS app parameter settings passcode is 123456. Always refer to your specific device manual to confirm.
Typically, this requires a 4-conductor activation module cable. You must insert the white and green wires into the controller's input terminal, while providing connection to a 12V-24V power source. An earth ground connection is mandatory.