Bluewater manufactures advanced SuperiorOsmosis™ water purification systems and reverse osmosis solutions, as well as rugged marine electrical switch components.
Bluewater is renowned for its innovative SuperiorOsmosis™ water purification technology, delivering clean, mineralized water for residential, commercial, and professional environments. Their product lineup includes advanced reverse osmosis systems, dosing pumps, control boxes, and dedicated brewers.
Additionally, under the greater Bluewater name, a distinct line of rugged marine electronic components—including IP69K-rated inrush push-button switches—covers various boating and custom nautical electrical configurations. This category provides access to comprehensive user manuals, installation guides, and safety instructions for both Bluewater's water purification solutions and marine electronic devices.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
The model, product number, and serial number are located on the data plate of your Bluewater device. You will need this information when contacting a dealer for service support.
Press the top button on the dosing pump to initiate pairing to the Control Box. Ensure the pump is placed close enough to the Control Box without dense metal obstructions for a reliable connection.
Press and hold the button for 5 seconds while in off mode until the LED flashes. Then press the button to cycle through the 3 backlight levels. Wait 3 seconds to automatically save the setting.
If the switch continues blinking after troubleshooting, you may need to install an electrolytic capacitor across Line B+ and Ground near the LED switch. This helps stabilize voltage and prevent InRush or over-current faults.