Bicycle Tail Light covers rear cycling lights, including the LY-5515, with manuals for mounting, remote pairing, charging and turn signals that improve visibility.
Bicycle Tail Light is a descriptive product category rather than a verified manufacturer brand. Available manuals cover the LY-5515 bicycle projection turn signal tail light, with rear lighting and directional ground projections.
Find instructions for mounting, remote pairing, lighting modes and solar or Type-C charging. Check your model number before following a guide.
No official manufacturer support, warranty or registration details have been verified.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
The available documentation covers the LY-5515 bicycle projection turn signal tail light. Check your product's model number before using these instructions.
Hold the main light button for three seconds until all lights turn on, then press any key on the remote to complete pairing.
Make sure the main light is switched on before using the remote. If needed, repeat the pairing procedure and check the remote's CR2032 battery.
Red indicates charging and green indicates a full charge. The manual describes solar and Type-C charging for the main light.
The remote uses a replaceable CR2032 battery. The manual states that the main light's internal battery cannot be replaced by the user.
No official warranty support or registration page has been verified. Check the product packaging and purchase records for the manufacturer or seller's contact details.