BACnet is a global open data communication protocol for building automation and control networks, used to integrate HVAC, lighting, and security devices.
BACnet (Building Automation and Control Network) is a widely adopted data communication protocol standardized by ASHRAE (Standard 135). It provides vendor-independent interoperability, allowing equipment and control devices from different manufacturers to communicate effectively. Within this category, you will find user manuals, installation guides, and configuration reference materials for a wide variety of BACnet-enabled products, such as gateways, network interfaces, sensor modules, and HVAC equipment.
Because BACnet is an open standard rather than a specific hardware manufacturer, the devices utilizing it are produced by numerous global brands. The manuals provided here help system integrators and technicians properly wire, assign MAC addresses, configure device instances, and troubleshoot MS/TP or IP networking for seamless automation system operations.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
BACnet stands for Building Automation and Control Network. It is an open data communication protocol standardized by ASHRAE (Standard 135) for building automation, allowing different systems like HVAC, lighting, and access control to seamlessly communicate.
These parameters are generally configured via the specific device's onboard setup menu, dip switches, or web interface. You will need to check the exact user manual for your specific BACnet-enabled device for detailed configuration steps.
Because BACnet is a communication standard and not a single hardware manufacturer, you should contact the specific original manufacturer of your BACnet-enabled equipment directly for warranty replacement and hardware technical support.
The default UDP port for a BACnet/IP network is standardly 47808 (represented as 0xBAC0 in hexadecimal).