Azoteq is a pioneer in sensor fusion technology, specializing in capacitive, inductive, and Hall-effect sensors, as well as LiFePO4 battery systems.
Azoteq is a leading semiconductor company and a recognized pioneer in sensor fusion technologies. They offer a diverse array of innovative solutions, including capacitive edge displays, inductive switches, and Hall-effect sensors. Through their renowned ProxSense®, ProxFusion®, and IQ Switch® product families, Azoteq provides advanced user interface components, touchpads, and smart switches designed for consumer electronics, industrial applications, and IoT devices.
Beyond specialized sensor ICs, Azoteq also develops advanced energy management solutions, such as the AZBAT series of LiFePO4 batteries and intelligent Battery Management Systems (BMS). Emphasizing integration and energy efficiency, Azoteq supports developers worldwide with robust graphical user interface (GUI) software and comprehensive evaluation kits for seamless real-time application tuning.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
After connecting your hardware and opening the Azoteq GUI software, click the 'START STREAMING' button to initiate connection. Then, click the 'ACK RESET' button (usually colored red) to clear the reset event flag. You can also use the 'Soft Reset' button to clear settings back to their defaults.
You can download the specific Graphical User Interface (GUI) PC application directly from the Azoteq website. Navigate to your specific product page (e.g., IQS325 or IQS9150), and look under the Design Support or Software and Tools section to download the associated zip file.
To activate the warranty for your Azoteq wall-mounted LiFePO4 battery (such as the AZBAT model), you must register your product by visiting https://www.azoteq.com/warranty/.
If the battery pack drops below the specified voltage threshold (e.g., 44.8V for a 51.2V system), the low voltage alarm will trigger. Ensure the battery is recharged within 12 hours after being fully discharged. If symptoms persist, check your inverter configuration and ensure correct charge controller settings per the Azoteq user manual.