An audio/video receiver (AVR) is an essential home theater component that processes audio and video signals while amplifying sound for loudspeakers.
An audio/video receiver (AVR) or stereo receiver is the central hub of a home theater or hi-fi audio system. Its primary function is to receive audio and video signals from various source devices—such as televisions, Blu-ray players, gaming consoles, and streaming boxes—process those signals, and provide the necessary power amplification to drive your loudspeakers. Furthermore, an AV receiver routes the video portion to a display, such as a TV or projector.
Modern AV receivers are equipped with advanced features, including countless surround sound formats like Dolby Atmos and DTS:X, network streaming capabilities, multi-room audio, and sophisticated room calibration systems. Whether you are building a basic stereo setup or a fully immersive surround sound home cinema, an AVR ensures seamless integration and control of all your entertainment components.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Use high-quality speaker wire to connect the positive and negative terminals on the back of the receiver to the corresponding terminals on your speakers. Ensure there are no loose strands of wire touching the chassis to avoid shorts.
Most AV receivers can be reset to factory defaults by pressing and holding a combination of physical buttons on the front panel (often the Power button and a specific input or listening mode button). Consult your specific model's manual for exact instructions.
It receives audio and video signals from your sources, processes them, amplifies the audio to power your unpowered speakers, and routes the video out to your TV or projector, acting as the central hub of your home entertainment system.
This could be due to a short circuit in your speaker wires causing the receiver to go into protection mode, inadequate ventilation leading to overheating, or an auto-standby feature enabled in the settings.