ASEPT is a global leader in hygienic dispensing solutions, specializing in portion-control pumps, condiment dispensers, and liquid packaging systems for the foodservice industry.
ASEPT is a renowned manufacturer known as 'The Dispensing Specialist,' providing innovative dispensing systems designed to promote hygiene, reduce food waste, and ensure consistent portion control. Based in Sweden and the United States, ASEPT partners with major food brands and restaurant chains to deliver custom and standard dispensing solutions for ketchup, mustard, sauces, and toppings.
The company’s product line includes touchless dispensers, lever-action pumps, and gravity-fed systems compatible with pouches, jars, and fountain vessels. Engineered for high-traffic environments, ASEPT products emphasize sanitation and ease of cleaning, with many components being dishwasher-safe. Their solutions are widely used in quick-service restaurants, convenience stores, and institutional catering to streamline operations and enhance the customer serving experience.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
ASEPT recommends cleaning, rinsing, sanitizing, and drying all pump components at least every 24 hours to comply with food safety regulations.
Yes, most internal pump components are dishwasher safe. However, outer shrouds, lids, and power supplies should typically be washed by hand or wiped down; check your specific model's manual for details.
First, ensure the pump is properly primed by pressing the mechanism until the product reaches the discharge tube. Check that the dome is fully inserted into the housing and that the pouch connection snaps securely into place.
For many manual models, portion size is adjusted by aligning holes on the handle and link arms with specific settings on the plunger stem, using clips or locking washers. Touchless and some specific models may have preset factory portions that cannot be changed.
Ensure the dome is pushed fully into the pump housing and that you hear a distinct 'click' when attaching the pump to the product pouch. Verifying these connections usually prevents leaks.