Aquaread makes water quality probes, level sensors, meters and data loggers for measuring and recording water conditions in environmental and research applications.
Aquaread manufactures scientific water monitoring equipment, including Aquaprobe water quality probes, Aquameter handheld meters, Aquasonde logging sondes and LeveLine level instruments.
Browse manuals for setup, calibration, data logging and maintenance of probes, meters, Bluetooth adapters and telemetry systems. Match instructions to your model and firmware version.
Water quality readings do not guarantee drinking-water safety; these instruments cannot detect harmful bacteria or toxins.
Selected manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Visit https://www.aquaread.com/downloads/brochures-and-manuals for official manuals, or browse the model-specific guides in this category.
Match your product model and firmware version to the manual's stated requirements. Check the document revision; contact Aquaread if you need instructions for older firmware.
Use https://www.aquaread.com/contact, email info@aquaread.com or call +44 1843 600030.
Connect BlueLink to the probe cable, launch the BlueLink app and select Scan. Tap the discovered device to connect, then use the app tabs for live data, logs and calibration.
The calibration option becomes available only after the parameter reading and temperature stabilize. Monitor the live graph and follow the probe's calibration instructions.
No. These instruments cannot detect harmful bacteria or toxins, and favorable readings do not guarantee water is safe for human or animal consumption.
