Apator is a European manufacturer of metering and switching equipment, specializing in advanced electricity, water, heat, and gas meters for utility networks and automation.
Apator is a prominent capital group based in Poland, operating primarily in the electromechanical and metering industries. The brand is a leading provider of advanced measurement solutions for all types of utilities, including electricity, water, heat, and gas. Apator's product portfolio encompasses a wide range of smart metering devices, low-voltage switchgear, control systems, and industrial automation components designed to modernize energy infrastructure and support efficient resource management.
The company is well-regarded for its specialized subsidiaries, such as Apator Powogaz (water metering) and Apator Metra (temperature sensors), which cater to both residential and industrial markets. Their offering includes sophisticated ultrasonic and static meters, communication modules for remote reading (such as wireless M-Bus and RF adapters), and robust housing for electrical distribution. Apator focuses on developing technologies that facilitate the creating of smart grids and enhance the operational efficiency of distribution networks.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Use the push buttons on the front panel to scroll through the measurement data on the LCD display. The display typically shows active energy consumption (OBIS code 1.8.0) and other parameters configured during production.
A visible triangle (often under the label 'CZO') can indicate a tamper event, such as the terminal cover being opened or magnetic interference. If the installation is correct, the error can often be cleared via the sealable service button.
If the low battery symbol appears, remove the battery cover marked with number 13 on the housing. Replace the battery with a CR2032 or CR2450 type battery. Disconnection from the mains is typically not required for this operation.
The APT-VERTI-1 is an RF adapter that converts data signals between an RF interface (Wireless M-Bus) and Bluetooth/USB. It allows technicians to read meter data using a mobile device application.
Apator is a Polish company with headquarters in Toruń and manufacturing facilities in Poland and the Czech Republic (via Apator Metra), serving international markets.